MIL-DTL-3655/22B
ENGINEERING DATA
Nominal impedance: 78 ohms.
Frequency range: 0 to 500 MHz.
Voltage rating: 500 V rms, maximum, at sea level; 125 V rms, maximum at 70,000 feet.
Mating connector: See table I of M3655/14.
REQUIREMENTS:
Design and construction: See figure 1 and MIL-STD-348.
Force to engage/disengage:
Torque: One inch-pound, maximum.
Longitudinal force: 3 pounds, maximum.
Coupling proof torque: Not applicable.
Mating characteristics (see figure 1 and MIL-STD-348 for dimensions):
Inner contact (sockets):
Oversize test pin: 0.042 inch diameter, minimum (nonclosed entry contacts only).
Test pin finish: 16 microinches.
Insertion depth: .093 inch, minimum.
Number of insertions: One.
Insertion force test:
Steel test pin diameter: .039 inch, minimum.
Test pin finish: 16 microinches.
Insertion depth: .093 inch, minimum.
Insertion force: 2 pounds, maximum.
Withdrawal force test:
Steel test pin diameter: .037 inch, maximum.
Test pin finish: 16 microinches.
Insertion depth: .093 inch, minimum.
Withdrawal force: 2 ounces, minimum.
Permeability: Applicable.
Hermetic seal: Not applicable.
Leakage: Not applicable.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business