MIL-DTL-39024/18F
TABLE I. Dash number and identification data.
Insulation color in
Dash number
accordance with
MIL-STD-104
01
White
02
Yellow
03
Brown
04
Red
05
Orange
06
Black
07
Green
08
Blue
09
Gray
10
Purple
REQUIREMENTS:
Design and construction:
Dimensions and configuration: See figure 1.
Contact: Contact shall be phosphor bronze in accordance with ASTM B139/B139M.
Insulation: Material shall be polytetrafluoroethylene in accordance with MIL-I-22129 or equal.
Test probe: 0.080 ± 0.001 inch in diameter (connector shall accept test probe from either end).
Operating voltage: 1,000 volts rms, maximum.
Operating temperature range: -65°C to +200°C.
Insulation resistance: Test circuit in MIL-DTL-39024 shall be used.
Dielectric withstanding voltage: Test circuit in MIL-DTL-39024 shall be used.
Test voltage (sea level): 1,000 volts rms, 60 hertz, shall be applied for 15 seconds.
Test voltage (50,000 feet): 350 volts rms, 60 hertz, shall be applied for 15 seconds.
Insertion and withdrawal forces:
Insertion force: 10.0 pounds (max).
Withdrawal force: 0.5 pound (min).
Resistance to test probe damage: ½ inch-pound moment shall be used for insertion depth of 3/16 inch
and ¼ inch.
Shock (specified pulse): Method 213, test condition I of MIL-STD-202.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business