MIL-DTL-83733/12D
Shell
L
M
N
size
3.030
2.580
2.150
A
3.000
2.570
2.130
4.330
3.880
3.450
B
4.300
3.870
3.430
Inches
mm
Inches
mm
Inches
mm
.005
.13
.566
14.38
3.000
76.20
.138
3.51
1.146
29.11
3.030
76.96
.196
4.98
1.170
29.72
3.870
98.30
.213
5.41
2.130
54.10
3.880
98.55
.223
5.66
2,150
54.61
4.300
109.22
.344
8.74
2.570
65.28
4.330
109.98
.558
14.17
2.580
65.53
NOTES:
1.
Dimensions are in inches.
2.
See MIL-DTL-83733 for interface and backend configuration requirements.
3.
This receptacle mates with MIL-DTL-83733/9, MIL-DTL-83733/10, MIL-DTL-83733/11 receptacles.
4.
For contacts see MIL-DTL-83733 and SAE AS39029/5, SAE AS39029/51 or SAE AS39029/57.
5.
For insert arrangements see MIL-STD-1531 and MIL-STD-1532.
6.
For spring mounting see MIL-DTL-83733/17.
7.
Springs are pre-loaded to 25 pounds each n free position.
8.
Spring forces will be 59 pounds minimum at .500 panel spacing and 88 pounds maximum at .390
panel spacing.
9. This configuration must no be used on the 131 and 185 contact layouts.
10. Metric equivalents are given for information only.
FIGURE 1. Dimensions and configurations - Continued.
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate
where changes from the previous issue were made. This was done as a convenience only and the
Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and
contractors are cautioned to evaluate the requirements of this document based on the entire content
irrespective of marginal notations and relationship to the last previous issue.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business