MIL-PRF-39012/81G
TABLE I. Dash numbers, cross-reference, and dimensions Continued.
Dash
Dimension A 8/ 9/
number
Applicable
Tool
Positioning
Locator
Crimp
Dimension
M39012/81-
cable
number
dies
pins
dies
B
Before
After
1/
M22520/
7/
M22520/5
M22520/
crimping
crimping
M17/
M22520/36
10/
CATEGORY F FIELD REPLACEABLE (MIL-DTL-22520 CRIMP TOOL) 2/
3207 11/
133-
4207 11/
RG405 *#
36-02
36-01
-05, -17 or
-22
.750
.620
--------
(19.05
(15.7
3208 11/
130-
mm)
mm)
4208 11/
RG402 *#
36-03
Not
maximum maximum
applicable
6/
3210
130-
4210
RG402 *#
5-01
--------
--------
-05 or -41
.691
.691
cavity B
(17.55
(17.55
mm)
mm)
maximum
maximum
3213
133-
4213
RG405 *#
5-01
--------
--------
-05 or -41
.511
.511
Not
cavity B
(12.98
(12.98
applicable
mm)
mm)
6/
maximum
maximum
1/ MIL-DTL-17 cables are specified by the basic number. The latest version of each cable shall be
applicable.
2/ These connectors have captivated center contacts.
3 Kit number Omni Spectra T-200, Amphenol 901-2500, or equivalent.
4/ All corrosion resistant steel bodied connectors shall be gold plated in accordance with ASTM B488,
type II, code C, class 1.27, at least in the area of solder attachment.
5/ Inactive for new design. Not for Air Force or Navy use.
6/ This dimension is furnished in the manufacturers assembly instructions.
7/ The locators required shall be indicated in the assembly instructions.
8/ Dimensions are in inches.
9/ Metric equivalents are given for information only.
10/ The A dimension before crimping determines the closeness of a bend in the cable to the rear of the
connector.
11/ Not for Army use. For OEM use only.
* Cable to be used when performing test requiring cable. All cable dash numbers in accordance with
MIL-DTL-17 specification sheet accommodate this connector.
# These cables are stripped using the dimensions as specified on figure 2.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business