MIL-DTL-12883/52B
Part or Identifying Number (PIN): The PIN shall consist of the basic number of this specification sheet
and the dash number from table I.
Example:
M12883/52
-001
Basic document number
Dash number (see table I)
TABLE I. Dash number and characteristics. 1/
Initial 2/ 3/
Applicable
Initial withdrawal 4/
socket
Configuration
Applicable
Dash
insertion force
force pounds (Newton)
contacts
relay
no.
pounds (Newton)
(max)
(min)
M39029/
M83536/2-028
101-553
30 (133.45)
9 (40.03)
.35 (1.56)
001
A
M83726/24, 25
002
B
M83536/6-025
101-553
45 (200.17)
16 (21.17)
.61 (2.17)
19.3
101-554
1.2 (5.34)
45 (200.17
003
C
M83536/22-025
(85.85)
101-553
1/ Reference MIL-PRF-83526 for supersession data on MIL-PRF-6106 relays.
2 Insert mating relay in a straight, downward manner into the socket contained in the mounting
bracket until relay is flush against socket face.
3/ To latch and lock relay against the socket, first apply a downward force on the relay end adjacent to
one side of the bracket latches until the relay tab(s) are properly locked into the latch(es). Repeat
the procedure to the opposite end of the relay to fully lock the relay in place.
4/ To release and remove the relay from the socket and the mounting bracket, use removal tool
A-A-59546-001.
Tools: See A-A-59546 and A-A59547 and the following:
a. Number 20 wire barrel, configurations A, B, C (-001, -002, -003).
Crimping M22520/1-01, /7-12
Positioner M22520/7-12
Installing removal M81969/16-01
b. Number 16 wire barrel, configuration C (-003) only.
Crimping M22520/7-01
Positioner M22520/7-12
Installing removal M81969/16-02
Group A inspection: Group A inspection shall consist of the test shown in MIL-DTL-12883.
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business