INCH-POUND
MIL-DTL-24231/22E(SH)
26 April 2013
SUPERSEDING
MIL-C-24231/22D(SH)
15 May 1987
DETAIL SPECIFICATION SHEET
CONNECTOR, RECEPTACLE, TYPE IV, 80-CONDUCTOR
This specification is approved for use by the Naval Sea Systems Command and is available for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-24231.
REQUIREMENTS:
2. Each nut, washer, and receptacle body shall be examined for cracks in accordance with the liquid penetrant
method of T9074-AS-GIB-010/271. Finding of cracks shall be cause for rejection.
3. Welding of the pin is allowed after the hull fitting body has been age-hardened to achieve its required
physical properties.
4. All dimensions are in inches.
5. Tolerances shall be as follows, or as stated:
Decimals ±0.005 inch.
a.
Fractions ±1/64 inch.
b.
Angular dimensions ±½ degree.
c.
6. These connectors are for maintenance purposes only.
AMSC N/A
FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business