MIL-DTL-24308/7J
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Pin diameter .041/.039 (1.04/0.99 mm) for arrangements A-1-1, A-2-1, A-3-1, A-4-1, A-5-1. Pin diameter
.0305/.0295 (0.775/0.749 mm) for arrangements A-1-2, A-2-2, A-3-2, A-4-2, A-5-2 and A-6-1.
4. Patent notice. The Government has a royalty free license under the U.S. Patents listed below for the benefit of
manufacturers of the items disclosed and described herein, either for the Government or for use in equipment
delivered to the Government.
Patent numbers
2790153 expires April 23, 1974
3110093 expires November 12, 1980
3158424 expires November 24, 1981
5. Copyright notice. All information disclosed in this military specification which is of may be copyrighted by ITT
Cannon Electric is reproduced herein with the express permission of the copyright owner.
6. Dimensions are .150 (3.81 mm) minimum full pin diameter extension (sizes 3 through 6) and .159 (4.04 mm)
minimum full pin diameter extension (sizes 1 and 2).
7. Indentation on the ends of the termination side of the shell, for the purpose of securing the insulator in the shell,
is permitted. This may result in the "F" dimension being undersized in these areas. However the "F" dimension
shall be maintained for the remainder of the connector.
8. See table I for supersession data.
9. Detail B is inactive for new design, use detail D.
Inches
mm
Inches
mm
Inches
mm
.004
0.10
.062
1.57
.115
2.92
.005
0.13
.065
1.65
.120
3.05
.008
0.20
.070
1.78
.125
3.18
.010
0.25
.086
2.18
.129
3.28
.030
0.76
.092
2.34
.130
3.30
.031
0.79
.102
2.59
.220
5.59
.040
1.02
.106
2.69
.422
10.72
FIGURE 1. Shell, plug, solder type - Continued.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business