MIL-DTL-24308/8R
6. Patent notice. The government has a royalty free license under the U.S. Patents listed below for
the benefit of manufacturers of the items disclosed and described herein, either for the government
of for use in equipment delivered to the government.
2790153 expires April 23, 1974
3110093 expires November 12, 1980
3158424 expires November 24, 1981
7. Copyright notice. All information disclosed in this military specification sheet which is or may be
copyrighted by ITT Cannon Electric is reproduced herein with the express permission of the
copyright owner.
8. Dimensions are .155 (3.94 mm) minimum full pin diameter extension (sizes 3 through 6) and .164
(4.17mm) minimum full pin diameter extension (sizes 1 and 2).
9. Indentation on the ends of the termination side of the shell, for the purpose of securing the insulator
in the shell, is permitted. This may result in the "F" dimension being undersized in these areas.
However the "F" dimension shall be maintained for the remainder of the connector.
10. See table II for shell supersession data.
11. Detail B is inactive for new design, use detail D.
Inches
mm
Inches
mm
Inches
mm
.004
0.10
.062
1.57
.115
2.92
.005
0.13
.065
1.65
.120
3.05
.008
0.20
.070
1.78
.125
3.18
.010
0.25
.086
2.18
.129
3.28
.030
0.76
.092
2.34
.130
3.30
.031
0.79
.102
2.59
.220
5.59
.040
1.02
.106
2.69
.375
9.52
FIGURE 1. Shell, plug, crimp type - Continued.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business