MIL-DTL-2726/1C
REQUIREMENTS
Dimensions and configurations: See figures 1 and 2.
Effectiveness of enclosure: Watertight in accordance with MIL-STD-108 when coupled with mating
receptacle.
Strain relief: 30 pounds.
Material: Housing and retainer polyamide (nylon).
Plug insulation and cap in accordance with ASTM-D5948 type MAI-60.
Compression washer beryllium copper (spring grade).
Contact hardness: Minimum of Rockwell 80F.
Packing assembly: MIL-S-19622/19(SH) PIN M19622/19-001 is inactive for new design and is no
longer used, except for replacement purposes. Future use should be made as
specified in ASTM-F1836M.
Mating receptacle: MIL-DTL-2726/7, PIN M2726/7-001 or PIN M2726/7-002.
Test cable: MIL-DTL-24643 and MIL-DTL-24643/3.
Assembly: Tapping of insulation (inserts not required) for assembly with housing is permitted.
Packing cap: See figure 2.
PIN: M2726/1-001.
Contact finish: Silver plate.
VERIFICATION
Verification shall be as specified in MIL-DTL-2726 and table I herein. The first article and
conformance inspections shall consist of the inspections as specified in table I, in the order shown.
3