MIL-DTL-2726/2C
REQUIREMENTS
Dimensions and configurations: See figures 1 and 2.
Effectiveness of enclosure: Watertight in accordance with MIL-STD-108 when coupled with
mating receptacle.
Strain relief: 30 pounds.
Material: Housing and retainer polyamide (nylon)
Plug insulation and cap in accordance with ASTM-D5948 type MAI-60.
Compression washer beryllium copper (spring grade).
Contact hardness: Minimum of Rockwell 80F.
Packing assembly: MIL-S-19622/19, PIN M19622/19-0007 is inactive for new design and is no
longer used, except for replacement purposes. For future use should be
made in accordance with ASTM-F1836M.
Mating receptacle: In accordance with MIL-DTL-2726/8, PIN M2726/8-001 or PIN M2726/8-002.
Test cable: In accordance with MIL-DTL-24643 and MIL-DTL-24643/3.
Assembly: Tapping of insulation (inserts not required) for assembly with housing is permitted.
Packing cap: See figure 2.
PIN: M2726/2-001.
Electrical rating: 50 - amperes, 250 - volt, direct current.
Contact finish: Silver plate.
Verification
Verification shall be as specified in MIL-DTL-2726 and table I herein. The first article and
conformance inspections shall consist of the inspections as specified in table I, in the order shown.
3