MIL-DTL-2726/30B
Inches
mm
0.13
.005
3.25
.128
3.94
.155
3.96
.156
4.77
.188
9.52
.375
10.31
.406
12.70
.500
17.47
.688
22.22
.875
66.67
2.625
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ± .016 (0.41mm) and ± .5° on angle.
4. Supersedes: Drawing 9000-S6202-S6202-73481, symbol 727.
FIGURE 1. Dimensions and configuration Continued.
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Contact resistance: When tested as specified in accordance with MIL-DTL-2726, the voltage drop shall
not exceed 10 millivolts. Measured between the connection stud of the plug and
the connection stud of the test receptacle.
Uncoupling force: Minimum of 5 pounds.
H.I. shock: Disengagement of the plug from its test receptacle under H.I. shock shall not be
considered as a failure.
Ball drop: Applicable if body material is plastic.
Contact hardness: Minimum of Rockwell 76B.
Mating receptacle: MIL-DTL-2726/32, Part or Identifying Number (PIN) M2726/32-001 (not furnished).
Material: Body rubber, in accordance with ASTM-D2000 or plastic, in accordance
with MIA-60 of ASTM-D5948.
Part number: M2726/30-001 (black), M2726/30-002(red).
Electrical rating: 10-ampere, 125-volt, alternating current or direct current.
Contact finish: Silver plate.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business