MIL-DTL-2726/5C
REQUIREMENTS
Dimensions and configurations: See figures 1 and 2.
Effectiveness of enclosure: Watertight in accordance with MIL-STD-108 when coupled with
mating receptacle.
Strain relief: 30 pounds.
Material: Housing and retainer polyamide (nylon).
Plug insulation and cap in accordance with type MAI-60 of ASTM-D5948.
Contact hardness: Minimum of Rockwell 80F.
Packing assembly: MIL-S-19622/19(SH) Part or Identifying Number (PIN) M19622/19-0007 is
inactive for new design and is no longer used, except for replacement purposes.
For future use should be made under ASTM-F1836M, (not furnished).
Mating receptacle: MIL-DTL-2726/11, PIN M2726/11-001 or PIN M2726/11-002 (not furnished).
Test cable: In accordance with MIL-DTL-24643 and MIL-DTL-24643/3 (not furnished).
Assembly: Tapping of insulation (inserts not required) for assembly with housing is permitted.
Packing cap: To be furnished, see figure 2.
PIN: M2726/5-001.
Electrical rating: 40-ampere, 450-volt, alternating current, 60-hertz.
Contact finish: Silver plate.
QUALITY ASSURANCE
Quality assurance shall be as specified in MIL-DTL-2726 and table I herein. The first article and
quality conformance inspections shall consist of the inspections as specified in table I, in the order
shown.
3