MIL-DTL-2726/51C
REQUIREMENTS
Dimensions and configuration: See figure 1.
Strain relief (molded connector): 40 pounds.
Molded connector: In accordance with W-C-596/11, Part or Identifying Number (PIN): WC596/11-1
except the grounding contacts shall be nickel-plated 0.0003 inch thick.
Electrical rating: 15-amperes, 125-volts, alternating current, 60-hertz.
Mating receptacle: MIL-DTL-2726/47, PIN M2726/47-002; MIL-DTL-2726/48,
PIN M2726/48-001.
Mating plug: W-C-596/13, PIN WC596/13-3.
PIN: M2726/51-001.
Plug assembly: M2726/50-001.
Packing assembly: M2726/50-004-3.
Cable: In accordance with 03H0F (3-1/4) of MIL-DTL-3432.
VERIFICATION
Verification shall be as specified in MIL-DTL-2726 and table I herein. The first article and
conformance inspections shall consist of the inspections as specified in table I, in the order shown.
TABLE I. First article and conformance inspection.
Inspection
First article
Conformance
X
X
Examination
X
X
Insulation resistance
X
X
Dielectric withstanding voltage
X
Endurance
X
Strain relief
X
Mechanical abuse
X
Ball drop impact
X
Current load
Marginal notations are not used in this revision to identify changes with respect to the previous issue due
to the extensiveness of the changes.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business