MIL-DTL-2726/6C
REQUIREMENTS
Dimensions and configurations: See figures 1 and 2.
Effectiveness of enclosure: Watertight in accordance with MIL-STD-108 when
coupled with mating receptacle.
Strain relief: 30 pounds.
Material: Housing and retainer polyamide (nylon).
Plug insulation and cap in accordance with ASTM-D5948 type MAI-60.
Compression washer beryllium copper (spring grade).
Contact hardness: Minimum of Rockwell 80F.
Packing assembly: MIL-S-19622/19 PIN M19622/19-0007 is inactive for new design and is no
longer used, except for replacement purposes. For future use should be
made under ASTM-F1836M.
Mating receptacle: MIL-DTL-2726/12, PIN: M2726/12-001 or M2726/12-002.
Test cable: In accordance with MIL-DTL-24643 and MIL-DTL-24643/3.
Assembly: Tapping of insulation (inserts not required) for assembly with housing is permitted.
Packing cap: See figure 2.
PIN: M2726/6-001.
Electrical rating: 40-ampere, 125-volt, alternating current, 60-hertz.
Contact finish: Silver plate.
VERIFICATION
Verification shall be as specified in MIL-DTL-2726 and table I herein. The first article and
conformance inspections shall consist of the inspections as specified in table I, in the order shown.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business