MIL-DTL-28731-19 Connector, Electrical, Rectangular Shield For 20, 38, 56, 90 Or 120 Removable Contacts

Pages 1 - 2 - 3 - 4

MIL-DTL-28731/19E

NOTES:

1. Dimensions are in inches.

2. Metric equivalents are given for general Information only.

3. Shield assemblies can be used with the following connector assemblies:

M28731/9-0109 and -0012; M28731/10-0109, -0111, -0112 and -0114; M28731/11-0073 and

-0075; M28731/12-0073 and -0075; M28731/13-0073 and -0075; M28731/14-0073 and -0075;

M28731/15-0073 and -0075; M28731/16-0073 and -0075; M28731/17-0109 and -0112;

M21731/18-0109, -0111, -0112 and -0114; M28731/29-0001and -0002; M28730/30-0001 and

-0002; M28731/31-0001 and -0002; M28731/32-0001 and -0002; M28731/33-0001 and -0002;

M28731/34-0001 and -0002.

4. Shield assemblies are supplied with (4) .086-56, .122-40, .138-32 screws for mounting shield to

insulator. Complete unit to be packaged in accordance with MIL-STD-2073-1, method 10.

5. Shield assemblies M28731/19-0011 through -0014 and -0019 through -0022 are supplied with a

rubber grommet No. MS-35489-4 in accordance with NASM3036 for placement in clearance hole

of acturating hardware shaft.

6. The Government has a royalty-free license under the following listed patents for the benefit of

manufacturers of the item either for the Government or for use in equipment to be delivered to the

Government. Patent notice: Patent No. 3,248,686 owned by Elco Corporation.

FIGURE 1. Shield, rectangular - Continued.