MIL-DTL-28804/10E
Inches
mm
Inches
mm
Inches
mm
.035
0.890
0.05
.002
.122
3.10
.0355
0.902
.003
0.08
.129
3.28
.036
0.91
0.13
.005
.141
3.58
.040
1.02
0.25
.010
.157
3.99
.041
0.46
.018
1.04
.166
4.22
.043
0.56
.022
1.09
.231
5.87
.046
.030
0.76
1.17
.237
6.02
.047
0.78
.031
1.19
.302
7.67
.048
0.81
.032
1.22
.312
7.92
.059
0.851
.0335
1.50
.53
13.5
.061
0.86
.034
1.55
.55
14.0
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Machined surfaces shall have 63 or better nominal roughness grade (Ra) in accordance with
ASME B46.1 unless otherwise specified.
4. Remove all burrs and sharp edges, .003 - .005 (0.09 0.13 mm) RAD unless otherwise specified.
5. All diameters shall be concentric with each other within .004 (0.10 mm) Total Indicator Runout
(TIR).
6. Dimensions shown apply after plating.
7. For use in MIL-DTL-28804.
8. For mating contacts, see MIL-DTL-28804/9.
9. Point at which a square ended pin of the same basic diameter as the mating contact first engages
the socket contact spring.
FIGURE 1. Connector, socket contact, size 22 Continued.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business