MIL-DTL-28840/14G
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Classes: D, DS, P, T, TS, Z and ZS.
Insert arrangements: See the figure of MIL-STD-1698 corresponding to the desired shell size.
Contacts: Style P or S crimp type.
Shell polarization: 1 thru 6, key position.
Mating counterpart: Plug connectors specified in MIL-DTL-28840/16, /17, /18, /19, /26, /28, and /29.
Installation and removal tool: As specified in MIL-I-81969/33 and /34.
Mounting nuts shall have six equally spaced holes capable of withstanding a 50 pound pull in
any direction when using the .030 inch minimum diameter wire specified in NASM33540. A backshell
shall be used to meet moisture and water pressure requirements.
O-ring material: Fluorosilicone.
Marking: The cover shall be identified with the manufacturer's name or trademark and the Part or
Identifying Number (PIN).
PIN example:
M28840/
14
A
G
1
P
1
Military designator
Specification sheet number
Class code letter
(Class D, code letter A)
(Class DS, code letter B)
(Class P, code letter F
(Class T, code letter L)
(Class TS, code letter N)
(Class Z, code letter S)
(Class ZS, code letter R)
Shell size
(See figure 1)
Insert arrangement
(See figure 1 and MIL-STD-1698)
Contact style
(See MIL-DTL-28840)
Keying
(See MIL-DTL-28840)
RESTRICTIONS:
Classes D and DS are inactive for NAVSEA new design, unless approved by NAVSEA.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business