MIL-DTL-3655/13B
Insertion force test:
Steel test pin diameter: .039 inch, maximum.
Test pin finish: 16 microinches.
Insertion depth: .093 inch, minimum.
Withdrawal force test:
Steel test pin diameter: .037 inch, maximum.
Test pin finish: 16 microinches.
Insertion depth: .093 inch, minimum.
Withdrawal force: 2 ounces, minimum.
Permeability: Applicable.
Hermetic seal: Not applicable.
Leakage: Not applicable.
9
Insulation resistance: 5 x 10 ohms, minimum.
Contact insulator captivation: Applicable; torque shall be 1 inch-pound.
Salt spray (corrosion): Applicable.
Connector durability: Applicable.
Contact resistance (milliohms, maximum):
Initial
After environment
Inner conductor contacts:
3.0
4.2
Outer conductor contacts:
.4
Not applicable
Braid to body
.2
Not applicable
Dielectric withstanding voltage: 1,500 V rms, minimum, at sea level.
Vibration, high frequency: Applicable.
Shock (specified pulse): Applicable.
Temperature cycling: Applicable.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business