MIL-DTL-3655/4C
ENGINEERING DATA
Nominal impedance: 95 ohms (balanced line not matched).
Frequency range: DC to 500 MHz, maximum.
Voltage rating: 500 V peak, maximum at sea level.
Mating connector: M3655/1-0421.
REQUIREMENTS:
Design and construction: See figures 1 and 2.
Center contact shall be plated in accordance with MIL-DTL-3655. All other metal parts shall be
silver plated to a minimum thickness of .0002 inch in accordance with ASTM-B700.
Force to engage/disengage:
Torque: Not applicable.
Longitudinal force: Not applicable.
Coupling proof torque: Not applicable.
Mating characteristics (see figures 1 and 2 for dimensions):
Center contact:
Oversize test pin: .062 inch diameter, minimum (non-closed entry contact only).
Test pin finish: 16 microinches.
Insertion depth: .093 inch, minimum.
Number of insertions: One.
Insertion force test:
Steel test pin diameter: .062 inch, minimum.
Test pin finish: 16 microinches.
Insertion depth: .125 inch, minimum.
Insertion force: 2 pounds, maximum.
Withdrawal force test:
Steel test pin diameter: .052 inch, maximum.
Test pin finish: 16 microinches.
Insertion depth: .125 inch, minimum.
Withdrawal force: 2 ounces, minimum.
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business