MIL-DTL-39024/4D
REQUIREMENTS:
Design and construction:
Dimensions and configuration: See figure 1.
Insulation: Material shall be polytetrafluoroethylene in accordance with ASTM D1710.
Operating temperature: -65°C to +200°C.
Test probe: See table I.
Contact current rating: 5 amperes (max).
Insulation resistance: Test circuit figure in MIL-DTL-39024 shall be used.
Dielectric withstanding voltage (at sea level): Test circuit figure in MIL-DTL-39024 shall be used.
Test voltage:
.080 test probe: 3,000 volts rms, 60 hertz.
.040 test probe: 1,500 volts rms, 60 hertz.
Insertion and withdrawal forces:
.080 test probe:
Insertion force: 4.5 pounds (max).
Withdrawal force: 0.4 pound (min).
.040 test probe:
Insertion force: 3 pounds (max).
Withdrawal force: 0.4 pound (min).
Thermal shock: Shall be in accordance with method 107 of MIL-STD-202, condition C.
Marking:
Part or Identifying Number (PIN): M39024/4-(dash number from table I).
3