MIL-DTL-55181/3D
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.028
0.71
.082
2.08
.235
5.97
.519
13.18
.038
0.96
.084
2.13
.250
6.35
.625
15.87
.040
1.01
.086
2.18
.275
6.99
.925
23.49
.041
1.04
.089
2.26
.298
7.57
.995
25.27
.042
1.06
.092
2.34
.303
7.70
1.000
25.40
.044
1.12
.094
2.39
.313
7.95
1.095
27.81
.047
1.19
.095
2.41
.344
8.74
1.103
28.01
.048
1.22
.099
2.51
.375
9.52
1.470
37.34
.052
1.32
.110
2.79
.406
10.31
1.585
40.26
.076
1.93
.125
3.17
.466
11.83
2.125
53.97
.078
1.98
.176
4.47
.470
11.94
2.500
63.50
.080
2.03
.233
5.92
.513
13.03
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified tolerances are ±.005 (0.13 mm) inch for three place decimals and ±.01
(0.3 mm) inch for two place decimals.
4. Angular tolerances shall be ±30 minutes unless otherwise specified.
5. See table l for cable size accommodations.
FIGURE 1. Dimensions and configuration - Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1 and table I.
Contacts: 35 ampere contact rating, 12 AWG.
Part or Identifying Number (PIN): The PIN shall consist of M55181/3 - (dash number as specified in
table I).
TABLE I. Dash numbers, cross reference and mating connector table.
Cable size accommodation
Mating connector
1/
PIN
Type designator
Type designator 1/
MIN
MAX
PIN
M55181/3-01
MW10M(M)A11
.292 (7.42)
.343 (8.71)
M55181/4-01
MW20F(M)A00
M55181/3-02
MW10M(M)A13
.323 (8.20)
.406 (10.31)
M55181/4-01
MW20F(M)A00
M55181/3-03
MW10M(M)A17
.448 (11.38)
.531 (13.48)
M55181/4-01
MW20F(M)A00
M55181/3-04 MW10M(M)A19 .511 (12.98) .593 (15.06) M55181/4-01
MW20F(M)A00
M55181/3-05 MW10M(M)A15 .386 (9.80) .468 (11.88) M55181/4-01
MW20F(M)A00
1/ This type designator shall not be referenced for procurement purposes.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business