MIL-DTL-55302/118E
Keying: See MIL-DTL-55302/31.
Mating and unmating: The maximum mating force in pounds shall be the number of contacts multiplied by .30
and the withdrawal force in pounds shall be a minimum of .03 times the number of contacts and shall not
exceed the measured insertion force.
Contact resistance: The average contact resistance of all contacts measured shall not exceed .015 ohm, and
no individual contact pair shall have a resistance exceeding .020 ohm.
Contact retention: .75 pound, minimum.
Dielectric withstanding voltage:
Sea level: 600 volts rms.
High altitude: 150 volts rms.
Solderability: Each connector shall be subjected to method 208 of MIL-STD-202 (solder termination only).
Part or Identifying Number (PIN): M55302/118 - (dash number from tables I and II).
Patent number 3,404,367. The Government has a royalty free license under this patent for the benefit of
manufacturers of the item either for the Government of for use in equipment to be delivered to the Government.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to
the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-55302, this document references the following:
MIL-DTL-55302/31
MIL-STD-202
MIL-DTL-55302/119
ASTM B768
MIL-M-24519
ASTM D5138
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - EC
Air Force - 11
(Project 5935-4470-000)
DLA - CC
Review activities:
Army - AR, AT, AV, CR4, MI
Navy - AS, MC, OS, SH
Air Force - 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at www.dodssp.daps.mil.
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business