MIL-DTL-55302/23H
Inches
mm
Inches
mm
Inches
mm
.003
0.08
.070
1.78
.175
4.44
.004
0.10
.074
1.88
.180
4.57
.005
0.13
.075
1.90
.185
4.70
.006
0.15
.080
2.03
.187
4.75
.010
0.25
.081
2.06
.208
5.28
.012
0.30
.083
2.11
.210
5.33
.015
0.38
.085
2.16
.212
5.38
.018
0.46
.096
2.44
.218
5.54
.022
0.56
.101
2.57
.225
5.72
.024
0.61
.109
2.77
.242
6.15
.026
0.66
.113
2.87
.245
6.22
.028
0.71
.125
3.18
.248
6.30
.030
0.76
.130
3.30
.250
6.35
.032
0.81
.135
3.43
.290
7.37
.035
0.89
.140
3.56
.332
8.43
.050
1.27
.145
3.68
.470
11.94
.054
1.37
.165
4.19.
.500
12.70
.069
1.75
.170
4.32
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.005 (0.13 mm) on three place decimals and ±.2º on angles.
4. These connectors mate with connectors specified in MIL-DTL-55302/24 and MIL-DTL-55302/25.
5. Minimum pad length on printed circuit board.
6. Numbers indication, every 5 cavities marked or molded on side (except 10 position). Numbers indicating
end cavities and lines indicating every 5 cavities molded or marked on mating face.
7. Termination layout on .025 (0.64 mm) modular grid.
8. Location indicators embossed on surface.
FIGURE 1. Connectors, plug, .075 (1.90 mm) spacing - Continued.
REQUIREMENTS:
Design and construction:
Dimensions and configuration: See figure 1.
Material:
Insulator body: Insulator material shall be in accordance with MIL-DTL-55302 or type GLCP-30F in accordance
with ASTM D5138 or MIL-M-24519.
Contact material: Contact material in accordance with MIL-DTL-55302 or beryllium copper alloy CDA174 in
accordance with ASTM B768.
Plating: The contact plating for the engagement area, .150 inch (13.81 mm) minimum length, shall be gold in
accordance with MIL-DTL-55302 over nickel in accordance with MIL-DTL-55302. The contact plating for the
solder tail area, .160 inch (4.06 mm) minimum length, shall be tin lead over nickel, with a tin lead dip in
accordance with MIL-DTL-55302 for .080 inch (2.03 mm) minimum length. The remainder of the contact shall
be nickel plated in accordance with MIL-DTL-55302.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business