MIL-DTL-55302/42C
Inches
mm
.001
0.03
.002
0.08
.0025
0.06
.005
0.13
.006
0.15
.010
0.25
.014
0.36
.018
0.46
.025
0.64
.031
0.79
.040
1.02
.050
1.27
.056
1.42
.084
2.13
.094
2.39
.100
2.54
.112
2.84
.144
3.66
.250
6.35
.282
7.16
.328
8.33
.371
9.42
.468
11.89
.562
14.27
.703
17.86
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are +.015 (0.38 mm).
4. Break all sharp edges .005 (0.13 mm) minimum.
5 C dimension is measured at the base of the draft angle at the top of the boss, at center line of shell.
6. Nominal spacing between any two adjacent contacts shall be .100 ± .002 (2.54 ± 0.005 mm);
overall tolerance between any span of 22 contacts shall be .100 ± .003 (0.08 mm); overall tolerance
between any span of 23 to 28 contacts shall be ±.004 (0.10 mm); overall tolerance between any
span of 29 through 35 contacts shall be ±.005 (0.13 mm).
7. For dimensions A through E, see table I.
8. This dimension is from the top of casting to bottom of lead-in chamfer of socket contact
SAE-AS39029/108 or SAE-AS39029/109.
9. Number 6 fillister head machine screw recommended for mounting.
10. SAE-AS39029/108 or SAE-AS39029/109 is to be packed separately, and shipped with the
connector.
11. See M81969/1-02 for insertion and removal tool.
FIGURE 1. Connector, receptacle, female, .100 inch contact spacing, removable crimp contacts Continued.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business