MIL-DTL-83513/22D
E
C
A
B
Number
Max
D
±.005
Max
±.007
of
(0.13 mm)
(0.18 mm)
contacts
9
1.390
1.150
.565
.3338
.885
(35.31)
(29.21)
(14.35)
(8.478)
(2.48)
15
1.390
1.150
.715
.4838
.945
(31.31)
(29.21)
(18.16)
(12.289)
(24.00)
21
1.690
1.450
.865
.6338
1.185
(40.64)
(36.83)
(21.97)
(16.099)
(30.10)
25
1.740
1.500
.965
.7338
1.275
(44.20)
(38.10)
(24.51)
(18.639)
(32.39)
31
2.040
1.800
1.115
.8838
1.575
(51.82)
(45.72)
(28.32)
(22.449)
(40.01)
37
2.340
2.100
1.265
1.0338
1.875
(59.44)
(53.34)
(32.13)
(26.259)
(47.63)
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are +.005 inch (0.13 mm).
4. Termination organization area to be optionally molded or filled with a potting fill material capable of passing
the electrical and environmental requirements of MIL-DTL-83513. Plastic molding shall conform to type GDI-
30F or type SDG-F in accordance with ASTM D5948 or GCT-30F in accordance with ASTM D5927 or MIL-M-
24519 or GST-40F in accordance with ASTM D4067 or MIL-M-24519 or GLCP-30F or GLCP-50 in
accordance with ASTM D5138 or MIL-M-24519.
5. Metal shell shall be of material in accordance with MIL-DTL-83513 for class M parts.
6. Jackpost (securely attached) when specified: Corrosion resistant steel in accordance with ASTM A484/A484M
and ASTM A582/A582M, 300 series stainless steel, passivated in accordance with SAE-AMS-2700, type 2.
Hardware will be attached in such a fashion as to not loosen during normal de-mating conditions, where as, the
mating connector hardware does not exceed the following torque values: 2.5 inch pounds for #2-56
(arrangements A - G) and 4.5 inch pounds for #4-40 (arrangement H).
7. Separately molded plastic body (if used) shall conform to type GDI-30F or type SDG-F in accordance with
ASTM D5948 or GCT-30F in accordance with ASTM D5927 or MIL-M-24519 or GST-40F in accordance with
ASTM D4067 or MIL-M-24519 or GLCP-30F or GLCP-50 in accordance with ASTM D5138 or MIL-M-24519.
8. Wire termination pins shall conform to A-A-59551, number 24 AWG copper, except shall be tin-lead plated with
a minimum of 3 percent lead.
9. Termination lengths available: .109 inch (2.77 mm), .140 inch (3.56 mm) or .172 inch (4.37 mm). The
tolerance shall be +.015 inch (0.381 mm) for all termination lengths.
10. Threaded insert, when specified: Corrosion resistant steel in accordance with ASTM A484/A484M and ASTM
A582/A582M, 300 series stainless steel, passivated in accordance with SAE-AMS-2700, type 2.
FIGURE 1. Connector plug, .050 spacing - Continued.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business