MIL-DTL-83538/10B
mm
Inches
mm
Inches
mm
Inches
0.64
0.025
3.18
0.125
25.4
1.000
0.89
0.035
3.68
0.145
38.10
1.500
0.100
0.004
4.95
0.195
1.58
0.062
5.21
0.205
NOTES:
1. Dimensions are in millimeters.
2. Inch equivalents are given for information only.
FIGURE 1. Cable bushing launcher receptacle Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1.
This cable bushing is used with MIL-DTL-83538/4.
Part or Identifying Number (PIN) example: M83538/10-1.
Material: Corrosion resistant, high performance resins, with or without filler materials, capable of
withstanding 175°C minimum. The resins must be defined by specifications listed in the DODISS or
published by professional materials associations. Exceptions may be granted by the qualifying activity.
QUALIFICATION: This cable bushing shall be in accordance with MIL-DTL-83538. The following
details and exceptions shall apply:
Group A: Visual and mechanical examination (100% inspection).
Group B: Not applicable.
Qualification and group C: Two test samples shall be required for stand alone qualification.
However, if the manufacturer is in the process of qualifying MIL-DTL-83538/4 connectors, then
one test sample is required:
Visual and mechanical examination
Salt spray. Manufacturers that are qualifying this bushing as a stand alone accessory shall
conduct salt spray in accordance with MIL-DTL-83538. Manufacturers that are in the
process of qualifying MIL-DTL-83538/4 receptacles concurrently with MIL-DTL-83538/10
cable bushings are not required to perform this test, since it is part of the qualification
process for MIL-DTL-83538/4. Separate testing is not required for group C, since the
bushing is included in the testing process for MIL-DTL-83538/4.
Post test examination.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business