MIL-DTL-83538/7B
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
0.15
.006
2.67
0.105
4.60
0.181
9.93
0.391
35.26
1.388
0.20
.008
2.94
0.1157
4.85
0.190
10.03
0.395
35.36
1.392
0.25
.010
2.95
0.116
5.11
0.201
17.65
0.695
37.39
1.472
1.35
.053
3.05
0.120
5.21
0.205
17.91
0.705
37.64
1.482
1.45
.057
3.15
0.124
5.26
0.207
32.03
1.261
39.57
1.558
1.63
.064
3.55
0.140
5.41
0.213
32.13
1.265
39.68
1.562
1.70
.067
3.81
0.150
6.99
0.275
34.06
1.341
40.13
1.580
1.73
.068
3.96
0.156
7.24
0.285
34.16
1.345
40.39
1.590
1.85
.073
4.01
0.158
9.65
0.380
34.57
1.361
43.82
1.725
2.54
0.100
4.27
0.168
9.91
0.390
34.72
1.367
NOTES:
1. Dimensions are in millimeters.
2. Inch equivalents are for information only.
FIGURE 1. Protective store cover receptacle - Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1.
This protective cover mates with MIL-DTL-83538/1.
Part or Identifying Number (PIN) example: M83538/7-1.
QUALIFICATION: Protective covers shall be in accordance with the qualification requirements of
MIL-DTL-83538. The following details and exceptions shall apply:
Group A: Visual and mechanical examination (100% inspection).
Group B: Not applicable.
Qualification and group C: Two MIL-DTL-83538/7 protective covers with mating connectors shall
be required for stand alone qualification. However, if a manufacturer is in the process of
qualifying MIL-DTL-83538/1 concurrently with MIL-DTL-83538/7, then one protective cover and
mating connector shall be required.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business