MIL-PRF-39012/82G
TABLE I. Dash numbers, cross-reference, and dimensions Continued. @
Dash
Dimension
Tool
Positioning
Locator pins
Dimension A
number
Applicable
Crimp dies
B and
number
dies
7/
M39012/82-
cable
M22520/5
After
Before
(mounting)
1/
M22520/
M22520/
M22520/36
crimping
crimping
M17/
8/
CATEGORY F FIELD REPLACEABLE (MIL-DTL-22520 CRIMP TOOL) 2/
3207 9/
133-
4207 9/
RG405 * #
36-02
36-01
-05, -17 or -
.750
.620 (15.7
Not
22
--------
(19.05
mm)
applicable
mm)
maximum
6/
maximum
130-
3208 9/
36-03
(4 hole)
4208 9/
RG402 *
3210
130-
-05 or -41
.691
.691
4210
RG402 * #
5-01
--------
--------
cavity B
(17.55
(17.55
mm)
mm)
maximum
maximum
Not
3215
applicable
133-
05 or 41
.511
.511
4215
(4 hole)
RG405 * #
5-01
--------
--------
cavity B
(17.50
(17.50
mm)
mm)
maximum
maximum
Not
applicable
3216
(2 hole)
4216
1/ MIL-DTL-17 cables are specified by the basic number. The latest version of each cable shall be
applicable.
2/ These connectors have captivated center contacts.
3/ Kit number Omni Spectra T-200, Amphenol 901-2500, or equivalent.
4/ All corrosion resistant steel bodied connectors shall be gold plated in accordance with ASTM B488,
type II, code C, class 1.27, at least in the area of solder attachment.
5/ Inactive for new design. Not for Air Force or Navy use.
6/ This dimension is furnished in the manufacturers assembly instructions.
7/ The locators required shall be indicated in the assembly instructions.
8/ The A dimension before crimping determines the closeness of a bend in the cable to the rear of the
connector.
9/ Not for Army use. For OEM use only.
@ Dimensions are in inches. Metric equivalents are given for information only.
* Cable to be used when performing test requiring cable. All cable dash numbers on this MIL-DTL-17
specification sheet accommodate this connector.
# These cables are stripped using the dimensions as specified on figure 2.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business