MIL-PRF-55339/10A
Permeability: <2.0.
Seal: Hermetic Not applicable.
Pressurized Not applicable.
Weatherproof Not applicable.
Insulation resistance: 5,000 megohms, min.
VSWR: 1.45:1, max .5 to 11 GHz.
RF leakage (total): Not applicable.
RF insertion loss: .28 dB, max, 6 GHz (.114 √F (GHz) dB max tested at 3 and 6 GHz).
Durability: 500 cycles minimum at 12 cycles/min, maximum. The connector shall meet the mating
characteristics and force to engage and disengage requirements.
Dielectric withstanding: Test voltage 3,000 V rms, min (sea level).
Contact resistance (milliohms, max):
Initial
After environmental
Contact
Center
2.0
2.5
Outer
0.2
N/A
Outer (-70001)
0.4
N/A
Vibration, high frequency: Interruptions 1 µs, max.
Shock: Test condition I.
Thermal shock: Test condition C.
Moisture resistance: 200 megohms, min.
Corona level: Voltage 750 V, min.
Altitude - 70,000 feet (4.437 kPa), min.
RF high potential withstanding voltage: RF voltage 2,500 V rms. min.
Frequency 5 MHz, min.
Salt spray (corrosion): Applicable.
Coupling mechanism retention force: 100 lb (444.82 N), min.
Part or Identifying Number (PIN): M55339/10-00567 or M55339/10-70001.
PIN: M55339/10-70001. CAUTION: THIS PART HAS A NICKEL PLATED BODY AND IS NOT FOR
USE IN APPLICATIONS WHERE PASSIVE INTERMODULATION GENERATION (PIM) MAY BE A
CONCERN.
Cross reference: See table I.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business