MIL-PRF-55339/33A
Durability: 500 cycles minimum at 12 cycles per minute maximum. The connector shall meet the mating
characteristics and force to engage and disengage requirements.
Dielectric withstanding: Test voltage - 1,500 V rms, min (sea level).
Contact resistance (milliohms, max).
Initial
After
Contact
Center
2.0
2.5
Outer
0.2
N/A
Outer (-70001)
0.4
N/A
Vibration, high frequency: Interruptions, 1 µs, max.
Shock: Test condition I.
Thermal shock: Test condition C.
Moisture resistance: 200 megohms, min.
Corona level: Voltage - 375 V, min.
Altitude - 70,000 feet (4.437 kPa), min.
RF high potential withstanding voltage: RF voltage 1,000 V rms, min.
Frequency - 5 MHz, min.
Salt spray (corrosion): Test condition B.
Part or Identifying Number (PIN): M55339/33-00001.
PIN: M55339/22-70001. CAUTION: THIS PART HAS A NICKEL PLATED BODY AND IS NOT
FOR USE IN APPLICATIONS WHERE PASSIVE INTERMODULATION GENERATION (PIM) MAY
BE A CONCERN.
Marginal notations are not used in this revision to identify changes with respect to the previous issue due
to the extent of the changes.
Referenced documents. In addition to MIL-PRF-55339, this document references the following:
MIL-STD-348
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business