MIL-STD-1531B
1. SCOPE
1.1 Scope. This standard covers insert arrangements for use with MIL-DTL-83733 rack and panel connectors, shell size A. It is used to control the dimensions and configuration of insert patterns and the contact sizes.
2 APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-83733 - Connectors, Electrical, Miniature, Rectangular Type, Rack to Panel, Environment Resisting, 200 °C Total Continuous Operating Temperature, General Specification For.
(Copies of these documents are available online at https://quicksearch.dla.mil/.
2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained
3. DEFINITIONS
3.1 Definitions. The terms used in this standard are generally accepted by the electrical and electronics industries and commonly used in electrical connector engineering practice.
4. GENERAL REQUIREMENTS: Not applicable.
5. DETAIL REQUIREMENTS
5.1 Dimensions. Dimensions shall be in accordance with figure 1.
5.2 Marking. Marking shall be in accordance with MIL-DTL-83733 and as shown on figure 1.
1
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business