MS17343G
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.001 .0035 .005 .006 .007 .010 .020 .021 .030 .031 .039 .062 .063 .108 .126 .141 .150 .155 .177 .182 .209 .260 .530 .553 .567 .594 .617 |
0.03 0.089 0.13 0.15 0.18 0.25 0.51 0.53 0.76 0.79 0.99 1.57 1.60 2.74 3.20 3.58 3.81 3.94 4.50 4.62 5.31 6.60 13.46 14.06 14.40 15.09 15.67 |
.622 .625 .640 .647 .672 .686 .692 .703 .711 .726 .729 .750 .764 .772 .780 .797 .817 .859 .867 .875 .897 .906 .922 .931 .938 .942 .953 |
15.80 15.86 16.26 16.43 17.07 17.42 17.58 17.86 18.06 18.44 18.52 19.05 19.40 19.61 19.81 20.24 20.75 21.82 22.02 22.22 22.78 23.01 23.42 23.65 23.83 23.93 24.21 |
.969 1.000 1.022 1.025 1.040 1.047 1.062 1.068 1.109 1.111 1.125 1.148 1.156 1.164 1.188 1.192 1.250 1.272 1.281 1.289 1.317 1.375 1.375 1.417 1.473 1.481 |
24.61 25.40 25.96 26.04 25.42 26.59 26.97 27.13 28.17 28.22 28.60 29.16 29.36 39.57 30.18 31.28 31.75 32.31 32.54 32.74 33.45 34.92 34.93 35.99 37.41 37.62 |
1.500 1.536 1.539 1.562 1.575 1.590 1.625 1.692 1.750 1.786 1.875 1.938 1.942 1.967 2.000 2.005 2.0625 2.161 2.1885 2.217 2.250 2.255 |
38.10 39.01 39.09 39.67 40.01 40.39 41.28 42.98 44.45 45.36 47.62 49.23 49.33 49.96 50.80 50.93 52.40 54.89 55.60 56.31 57.15 57.28 |
2.3125 2.375 2.411 2.375 2.500 2.530 2.625 2.692 2.750 2.780 2.8750 3.000 3.125 3.250 |
58.74 60.33 61.24 60.33 63.50 64.25 66.68 68.38 69.85 70.61 73.020 76.20 79.38 82.55 |
NOTES:
1. All dimensions are in inches.
2. Unless otherwise specified, tolerances are ± .016 inch (0.41 mm).
3. Metric equivalents are given for information only.
4. Maximum termination of grommet extension for sizes 12 and 16 contacts for class J.
5. Maximum termination of grommet extension for sizes 0, 4, and 8 contacts for class J.
6. Dimensions shall be maintained when inserts are pressed firmly against indicated shoulder.
7. For size 0 contacts only: Increase Z dimension by .312 inch (7.92 mm) for shell sizes 12 through
40, and increase Z dimension by .062 inch (1.57 mm) for shell size 44.
FIGURE 1. Dimensions and configuration - Continued.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business