MS17344G
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.001 .003 .0035 .005 .006 .007 .010 .011 .016 .019 .020 .030 .031 .047 .049 .062 .078 .084 .100 .109 .115 .125 .141 .150 .172 .250 .275 |
0.03 0.08 0.09 0.13 0.15 0.18 0.25 0.28 0.41 0.48 0.51 0.76 0.79 1.19 1.24 1.57 1.98 2.13 2.54 2.77 2.92 3.18 3.58 3.81 4.37 6.35 6.99 |
.300 .342 .417 .477 .529 .554 .593 .610 .618 .627 .655 .672 .674 .677 .679 .701 .717 .738 .750 .752 .761 .771 .774 .793 .797 .800 .804 |
7.62 8.69 10.59 12.12 13.44 14.07 15.06 15.49 15.70 15.93 16.64 17.07 17.12 17.20 17.25 17.81 18.21 18.75 19.05 19.10 19.33 19.58 19.66 20.14 20.24 20.32 20.42 |
.875 .877 .892 .898 .922 .929 .967 .985 1.000 1.002 1.027 1.040 1.041 1.052 1.062 1.109 1.125 1.128 1.156 1.164 1.177 1.235 1.250 1.252 1.281 1.289 |
22.22 22.28 22.66 22.81 23.42 23.60 24.56 25.02 25.40 25.45 26.09 26.42 26.44 26.72 26.97 28.17 28.60 28.65 29.36 29.57 29.90 31.37 31.75 31.80 31.54 32.74 |
1.302 1.359 1.375 1.453 1.469 1.485 1.500 1.522 1.539 1.563 1.609 1.625 1.672 1.688 1.750 1.772 1.780 1.844 1.859 1.8750 1.9225 1.967 1.982 2.000 2.0625 2.096 2.109 |
33.07 34.52 34.93 33.91 37.31 37.72 38.10 38.66 39.09 39.70 40.87 41.28 42.47 42.88 44.46 45.01 45.21 46.84 48.22 47.625 48.832 49.96 50.34 50.80 52.40 53.24 53.57 |
2.141 2.217 2.232 2.250 2.3125 2.344 2.359 2.391 2.500 2.522 2.530 2.594 2.625 2.629 2.672 2.750 2.844 2.875 2.922 3.000 3.156 3.172 3.406 |
54.38 56.31 56.70 57.15 58.74 59.54 59.92 60.73 63.50 34.06 64.26 65.89 66.70 66.78 67.87 69.85 72.24 73.04 74.22 76.20 80.16 80.57 86.51 |
NOTES:
1. All dimensions are in inches.
2. Unless otherwise specified tolerances are ± .016 inch (0.41 mm).
3. Metric equivalents are given for information only.
4. Maximum termination of grommet extension for sizes 12 and 16 contacts for class J.
5. Maximum termination of grommet extension for sizes 0, 4, and 8 contacts for class J.
6. Dimensions shall be maintained when inserts are pressed firmly against indicated shoulder.
7. Dimensions shall be 1.210 (30.73 mm) maximum to .920 (23.37 mm) minimum for size 0 contacts only.
8. Front and rear washers for sizes 32 and 36 only. Rear washers for sizes 40 and 44 only.
FIGURE 1. Dimensions and configuration - Continued.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business