MS17347F
REQUIREMENTS:
Design and construction: See figure 1.
Dimension are in inches. Metric equivalents are given for information only. Unless otherwise specified, tolerance is ± .016 (0.41 mm).
Mates with plugs shown on MS17344.
For size 0 contacts only: Increase Z dimension by .312 (7.92 mm) for shell sizes 12 through 40, and increase Z dimension by .062 (1.57 mm) for shell size 44.
For shell size, insert arrangement, alternate position, contact size, spacing and service rating, see
MIL-STD-1651.
Shell and jam nut finish: See MIL-DTL-22992.
Class shall be designated by the letter C (pressurized), J (pressurized with grommet) or R (environmental resisting).
Part or Identifying Number (PIN) example:
MS17347 J 20 C 27 P W
MS number
Class Shell size Finish
Insert arrangement Contact style Alternate position
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-22992, this document references the following: MS17344
MS17349
MIL-STD-1651
SAE-AS29513
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business