MS17350F
REQUIREMENTS:
Design and construction: See figure 1.
Chain shall be passivated stainless steel in accordance with type II, class 3, trade number 8, as specified in RR-C-271. Chain shall be within one link of length specified.
Cover mates with MS17344.
Cover finish shall be in accordance with MIL-DTL-22992. Chain shall move freely on protective cap after assembly.
Full part number marking shall be in accordance with MIL-DTL-22992, and shall include the "JAN
brand" (JAN or J) certification marking.
Part or Identifying Number (PIN) example:
MS17350 N 28
MS number
Finish
Size
Qualification:
Visual and mechanical examination. Magnetic permeability.
Water immersion (with protective cover). Salt spray (corrosion).
Tensile.
Air leakage.
Group A sampling plan: Lot and sample sizes shall be as specified in table I. Samples shall be randomly selected from the lot. If one or more defects are found, the lot shall be rescreened and defects removed. A new sample as specified in table I shall then be randomly selected. If one or more defects are found in the second sample lot, the lot shall not be supplied to this specification.
TABLE I. Group A sampling plan.
Lot size |
Sampling size |
1 to 13 14 to 150 151 to 280 281 to 500 501 to 1,200 1,201 to 3.200 |
100 percent 13 units 20 units 29 units 34 units 42 units |
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business