MS18203G
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ±.016 inch (0.41mm).
4. Material aluminum alloy in accordance with SAE AMS4015, temper O, or ASTM 8209, temper H12,
.040 inch (1.02mm) thick.
5. Finish anodize in accordance with MIL-A-8625, type I or type II.
6. PIN examples:
a. Polarization required, specify as MS18203- # (A through G): Example: MS18203-14D (see note 7).
b. Polarization not required, specify as MS18203- #: Example: MS18203-5.
7 One polarization pin is used when applicable. Polarization pin will be packaged lose. If a polarization pin only is required order separately as MS18205.
8. MS18203-11, -12, -13, -14, -15, and -16 are not used with one-piece jackscrew shields of MS24133.
FIGURE 1. Plug shell configurations - Continued.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-28748, this document references the following: MIL-A-8625
MS18205
MS24133
ASTM 8209
SAE AMS4015
CONCLUDING MATERIAL
Custodians: Preparing activity: Army - CR DLA - CC
Navy - EC
Air Force - 85 (Project 5935-2009-168) DLA - CC
Review activities:
Army - AM, AR, AT, CR4, MI Navy - AS, MC, OS
Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business