MS24129D
Inches |
mm |
Inches |
mm |
Inches |
mm |
.001 |
0.03 |
.25 |
6.4 |
.781 |
19.84 |
.025 |
0.64 |
.38 |
9.7 |
.937 |
23.80 |
.031 |
0.79 |
.44 |
11.2 |
1.00 |
25.4 |
.06 |
1.5 |
.50 |
12.7 |
1.09 |
27.7 |
.12 |
3.0 |
.56 |
14.2 |
1.19 |
30.2 |
.19 |
4.8 |
.78 |
19.8 |
1.25 |
31.8 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified tolerances shall be ±.02 inch (0.51 mm) for two place decimals, and
±.005 inch (0.13 mm) for three place decimals.
4. The rear shell shall be made detachable for maintenance purposes.
5. Coupling ear to be free and independent of hood shell.
FIGURE 1. Hood dimensions and configuration - Continued. REQUIREMENTS:
Dimensions and configuration: See figure 1.
Groups A and B inspections are required in lieu of qualification.
Hood (MS24129) is to be used in conjunction with MS24128 (ring coupling, fixed) and black nylon nut
.16 inch (4.06 mm) .875-20 UNEF-2B. Material:
Brass in accordance with ASTM B36, copper alloy UNS number C26000, half hard temper. Finish:
Cadmium plate, in accordance with SAE AMS-QQ-P-416, type II, class 3. Part or Identifying Number (PIN) example:
MS24129- 1
MS number
Dash number
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business