MS18132G
Shield designator |
Connector size (number of contacts) |
A min max |
8 ±0.016 (0.41) (mm) |
C ±0.016 (0.41) (mm) |
D ±0.005 (0.13) (mm) |
F Minimum cable opening square inch (mm) |
G ±0.047 (1.19) (mm) |
MS24132-1T MS24132-1S |
7 |
1.18 (30.0) 1.35 (34.3) |
1.218 (30.94) |
0.437 (11.10) |
0.906 (23.01) |
0.07 (1.8) |
0.265 (6.73) |
MS24132-2T MS24132-2S |
9 |
1.18 (30.0) 1.35 (34.3) |
1.312 (33.32) |
0.437 (11.10) |
1.000 (25.40) |
0.16 (4.1) |
0.265 (6.73) |
MS24132-3T MS24132-3S |
14 |
1.18 (30.0) 1.35 (34.3) |
1.250 (31.75) |
0.500 (12.70) |
0.937 (23.80) |
0.19 (4.8) |
0.265 (6.73) |
MS24132-4T MS24132-4S |
20 |
1.18 (30.0) 1.35 (34.3) |
1.562 (39.67) |
0.500 (12.70) |
1.250 (31.75) |
0.22 (5.6) |
0.265 (6.73) |
MS24132-5T MS24132-5S |
26 |
1.18 (30.0) 1.35 (34.3) |
1.625 (41.28) |
0.634 (16.10) |
1.312 (33.32) |
0.26 (6.6) |
0.265 (6.73) |
The following designators are the same as those listed above, except the two .120 inch (3.05 mm) diameter thru holes for mounting are threaded and the two .196 inch (4.98 mm) diameter holes are omitted. NOT RECOMMENDED FOR NEW DESIGN.
Shield designator |
Connector size (number of contacts) |
Thread size |
MS24132-6T MS24132-6S |
7 |
4-40 UNC-28 |
MS24132-7T MS24132-7S |
9 |
4-40 UNC-28 |
MS24132-8T MS24132-8S |
14 |
4-40 UNC-28 |
MS24132-9T MS24132-9S |
20 |
4-40 UNC-28 |
MS24132-10T MS24132-10S |
26 |
4-40 UNC-28 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ±.016 inch (0.41 mm).
4. For shield with top cable opening suffix part number with "T".
For shield with side cable opening suffix part number with "S".
5. Material aluminum alloy in accordance with SAE AMS4016, temper H32 .040 inch (1.02 mm) thick.
6. Finish anodize in accordance with MIL-A-8625, type I or type II.
7. Spacer washers (4) used only with shell: Discard otherwise.
8. Edges of cable entry hole to be rounded to prevent insulation chafing.
9. No cracks, chips, or sharp edges on all 4 edges of flange.
FIGURE 1. Shields for 7, 9, 14, 20, and 26 - Continued.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business