MS24133K
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ±.016 inch (0.41 mm).
4. For shield with top cable opening suffix part number with "T".
For shield with side cable opening suffix part number with "S".
5. Material aluminum alloy in accordance with SAE AMS4016, temper H32 .040 inch (1.02 mm) thick.
6. Finish anodize in accordance with MIL-A-8625, type I or type II.
7. Spacer washers (4) used only with shell: Discard otherwise.
8. Edges of cable entry hole to be rounded to prevent insulation chafing.
9. No cracks, chips, or sharp edges on all 4 edges of flange.
FIGURE 1. Shields for 34, 42, 50, and 75 - Continued. Shields for 34, 42, 50, and 75. See figure 1.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-28748, this document references the following: MIL-A-8625
MIL-DTL-28748/1
MIL-DTL-28748/2
MIL-DTL-28748/5
MIL-DTL-28748/6
SAE AMS4016
CONCLUDING MATERIAL
Custodians: Preparing activity: Army - CR DLA - CC
Navy - EC
Air Force - 85 (Project 5935-2009-172) DLA - CC
Review activities:
Army - AM, AR, AT, CR4, MI Navy - AS, MC, OS, SH
Air Force - 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business