MS24697A
REQUIREMENTS:
Dimensions and configuration see figure 1.
Material: Stainless steel spring wire type 631 in accordance with ASTM A313 UNS designator S17700. No permanent set allowable at solid length, spring must withstand 260°C (500°F) continuously.
Part or identifying number (PIN):
MS PIN |
Total coils |
Active coils |
I.D. +.010 (inches) |
Wire Dia. (inches) |
Approximate free length (inches) |
Spring rate per inch |
LBS load at .550 inch |
MS24697-1 |
8 � |
6 � |
.233 |
.047 |
.755 |
47 lbs |
9.9 ±5% |
MS24697-2 |
10 |
8 |
.230 |
.040 |
.875 |
23 lbs |
7.6 ±5% |
MS24697-3 |
11 |
9 |
.235 |
.035 |
.945 |
12 lbs |
4.8 ±5% |
Part or identifying number (PIN) (metric): 1/
MS PIN |
Total coils |
Active coils |
I.D. +0.25 (mm) |
Wire Dia. (mm) |
Approximate free length (mm) |
Spring rate per 25.4 mm |
kg load at 13.97 mm |
MS24697-1 |
8 � |
6 � |
5.92 |
1.19 |
19.17 |
21.32 kg |
4.49 ±5% |
MS24697-2 |
10 |
8 |
5.84 |
1.02 |
22.23 |
10.43 kg |
3.45 ±5% |
MS24697-3 |
11 |
9 |
5.97 |
0.89 |
24.00 |
5.44 kg |
2.18 ±5% |
1/ Metric equivalents are given for general information only.
Referenced documents: In addition to MIL-DTL-26518 this document references the following: ASTM A313
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
CONCLUDING MATERIAL
Custodians: Preparing activity: Air Force - 11 DLA - CC
DLA - CC
Review activities: DLA - IS
(Project 5935-4704-000)
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business