MS27146C
Inches |
mm |
Inches |
mm |
Inches |
mm |
.002 |
.051 |
.137 |
3.48 |
.437 |
11.10 |
.043 |
.76 |
.150 |
3.81 |
.620 |
15.75 |
.050 |
1.27 |
.157 |
3.99 |
.795 |
20.19 |
.060 |
1.52 |
.187 |
4.75 |
.825 |
20.96 |
.065 |
1.65 |
.218 |
5.08 |
.875 |
11.23 |
.075 |
1.90 |
.250 |
6.35 |
1.095 |
27.81 |
.118 |
3.00 |
.271 |
6.89 |
||
.120 |
3.05 |
.344 |
8.74 |
FIGURE 1. Configuration and dimensions - Continued.
REQUIREMENTS: Material:
Shell: Rubber in accordance with ASTM D2000, M3BC610A14C12E034F19.
Terminal: Brass composition, temper half hard minimum in accordance with ASTM B 36/B 36M, ASTM B 121/B 121M or ASTM B124/B 124M.
Terminal protective finish: Silver plate, grade D, class S, .0002-inch minimum thickness in accordance with ASTM B700.
When connectors are coupled, the following requirements shall apply:
Voltage drop: The voltage drop shall not exceed 20 millivolts and shall meet the requirements outlined in MIL-STD-202, method 307.
Dielectric strength: The assembly shall withstand dielectric strength test of 1000 volts, and meet the requirements outlined in MIL-STD-202, method 302.
Waterproof requirements: The assembly shall be waterproof. Refer to MIL-HDBK-1184, or equivalent, for guidance on waterproof testing.
Salt spray corrosion test: The assembly shall meet the requirements of salt spray corrosion test outlined in MIL-STD-202, method 101 (5% saline solution, 200 hours duration).
Mating connector: See MS27145.
Part or Identifying Number (PIN): MS27146-1.
Engineering parts list may be obtained from the U.S. Army Tank Automotive Command, Warren, MI
48397-5000.
(Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business