MS27291G
REQUIREMENTS
Dimensions and configurations: See figure 1. Materials:
Cable strap; aluminum alloy in accordance with SAE-AMS-QQ-A-367 or ASTM-B209 or stainless steel type, 300 or 216 series. Cable strap for use with class R and F connectors. For aluminum alloy, anodize in accordance with MIL-A-8625 or suitable hard anodizing process to meet the performance requirements of MIL-DTL-26500 and MIL-DTL-83723. For stainless steel the finish shall be black oxide or equivalent. Cable strap for use with class G connectors; for stainless steel, chromium plating in accordance with SAE-AMS-QQ-C-320, class 2a, type II, .0002 minimum thickness.
Cable support; aluminum alloy in accordance with ASTM-B85/B85M composition 13, A13, A380, or
380. Cable support use with class R and F connectors; for aluminum alloy, in accordance with
MIL-A-8625 or suitable hard anodizing process to meet the performance requirements of MIL-DTL-26500 and MIL-DTL-83723. Cable support for use with class G connectors; for aluminum alloy, chromium plating in accordance with SAE-AMS-QQ-C-320, class 2a, type II,
.0002 minimum thickness.
Part or Identifying Number (PIN): MS27291-1.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-26500, this document references the following: MIL-A-8625
MIL-DTL-83723
FED-STD-H28
SAE-AMS-QQ-C-320
SAE-AMS-QQ-A-367
NASM35275
NASM35338
ASTM-B85/B85M ASTM-B209
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business