MS27337E
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
0.004 |
0.102 |
0.02 |
0.508 |
0.078 |
1.981 |
0.139 |
3.531 |
0.005 |
0.127 |
0.039 |
0.991 |
0.094 |
2.388 |
0.141 |
3.581 |
0.01 |
0.254 |
0.045 |
1.143 |
0.109 |
2.769 |
0.223 |
5.664 |
0.011 |
0.279 |
0.053 |
1.346 |
0.116 |
2.946 |
0.235 |
5.969 |
0.012 |
0.305 |
0.062 |
1.575 |
0.125 |
3.175 |
0.312 |
7.926 |
0.017 |
0.432 |
0.063 |
1.600 |
0.126 |
3.200 |
NOTES:
1. Dimensions are in inches. Metric equivalent are given for information only.
2. Insert front surface shall be flat within .005 T.I.R.
3. Diameters A, D, M, Q and Z shall be concentric within .015 T.I.R.
4. Diameters D and I shall be concentric within .005 T.I.R. at MMC.
5. Diameter A with respect to diameter B, and diameter D with respect to diameter N, shall be concentric at MMC.
6. Sides of groove may have 5° max taper.
7. Normal keyway position. For other keyway positions, see MIL-DTL-27599.
8. The point at which a gauge pin having the same basic diameter as the mating contact and a square face, touches socket contact spring.
9. Recommended packing for o-ring shall be in accordance with SAE-AS3578. Recommended
packing is for dimensions only. Material is optional.
10. The gauge features for GG shall be CC smaller than their MMC size at basic location.
FIGURE 1. Receptacle, jam nut mounting - Continued.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business