MS27342E
REQUIREMENTS:
Dimensions and configuration: See figures 1 and 2. Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MIL-DTL-38999 series I and series II.
Qualification:
Examination of product. Mating and unmating forces. Humidity.
Salt spray (corrosion). Altitude immersion.
Group A sampling inspection. 100% inspection is not applicable. Sampling inspection shall be in accordance with table I:
TABLE I. Group A sampling plan.
Lot size |
Sample size |
1 to 13 14 to 150 151 to 280 281 to 500 501 to 1,200 1,201 to 3,200 |
100 percent 13 units 20 units 29 units 34 units 42 units |
Part or Identifying Number (PIN) example:
MS27342 A 12 -1
MS number Finish (color) Shell size
Adapter Geometry
-1: open adapter
-2: strain relief adapter
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business