MS27481F
Shell size |
O FLAT +.001 -.006 |
Q dia ±.016 |
S ±.016 |
z dia +.006 -.005 |
CC |
DD min dia |
EE +.005 -.000 |
Recommended packing ("O" ring) see note 9 |
For insert arrangement, see MS drawing |
8 |
.817 |
1.375 |
1.250 |
.965 |
.004 |
.678 |
.140 |
AS3578 - 022 |
27343, 27516 |
10 |
.941 |
1.500 |
1.375 |
1.090 |
.010 |
.780 |
AS3578 - 024 |
27344, 27517 |
|
12 |
1.065 |
1.625 |
1.500 |
1.215 |
.963 |
AS3578 - 026 |
27345, 27518 |
||
14 |
1.190 |
1.750 |
1.625 |
1.340 |
1.088 |
AS3578 - 028 |
27346, 27519 |
||
16 |
1.320 |
1.938 |
1.781 |
1.477 |
1.222 |
AS3578 - 029 |
27347, 27520 |
||
18 |
1.440 |
2.016 |
1.890 |
1.602 |
1.333 |
AS3578 - 030 |
27348, 27521 |
||
20 |
1.565 |
2.141 |
2.016 |
1.727 |
1.458 |
.166 |
AS3578 - 031 |
27349, 27522 |
|
22 |
1.690 |
2.265 |
2.140 |
1.852 |
1.583 |
AS3578 - 032 |
27350, 27523 |
||
24 |
1.815 |
2.390 |
2.265 |
1.977 |
1.708 |
AS3578 - 033 |
27351, 27524 |
NOTES:
1. Dimensions are in inches.
2. Insert front surface shall be flat within .005 T.I.R.
3. Diameters A, D, M, Q and z shall be concentric within .005 T.I.R.
4. Diameters D and I shall be concentric within .005 T.I.R at MMC.
5. Diameter A with respect to diameter B, and diameter D with respect to diameter N, shall be concentric at MMC.
6. Sides of groove may have 5° max taper.
7. Normal keyway position. For other keyway positions see MIL-DTL-38999.
8. The point at which a gage pin, having the same basic diameter as the mating contact and a square face, touches socket contact spring.
9. Recommended packing is for dimensions only. Material is optional.
10 The gauge features for GG shall be CC smaller than their MMC size at basic location.
FIGURE 1. Receptacle, classes E and T - Continued.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business