MS27487F
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MIL-DTL-38999 series I and series II.
Qualification:
Examination of product. Mating and unmating forces. Humidity.
Salt spray (corrosion). Altitude immersion.
Group A sampling inspection. 100% inspection is not applicable. Sampling inspection shall be in accordance with table I:
TABLE I. Group A sampling plan.
Lot size |
Sample size |
1 to 13 14 to 150 151 to 280 281 to 500 501 to 1,200 1,201 to 3,200 |
100 percent 13 units 20 units 29 units 34 units 42 units |
Part or Identifying Number (PIN) example:
MS27487 -12 -1
MS number
Shell size
Adapter geometry
-1: Straight adapter
-2: 90° elbow adapter
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-38999, this document references the following: SAE-AS85049/32
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business