MS27502J
Inches
.005
.010
.015
.030
.094
.1
.105
.138
.167
.23
.25
.50
.70
.71
mm
45.0
45.7
46.5
48.0
48.7
53.3
55.9
76.2
88.9
101.6
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Finish: See MIL-DTL-38999.
4. Not for space born applications.
FIGURE 1. Cover - Continued.
REQUIREMENTS:
Dimensions and configuration: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. Material:
Cover - Impact extruded or machined aluminum alloy. Disk - Silicone or fluorosilicone elastomer.
Ring - Stainless steel passivated, .030 max thickness. Chain - Stainless steel, passivated.
Fastener - Stainless steel, passivated.
Mating connectors: MIL-DTL-38999 Series I, and MIL-C-27599 Series I. Disk shall be bonded, or mechanically retained.
Chain shall rotate freely on cover fastener.
The protective cover and chain assembly shall withstand a static tensile load of 35 pounds applied along the B reference line for 5 minutes.
Fastener tensile strength: Both axial and longitudinal directions shall be 25 pounds. The load shall be applied to the end of the chain.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business