MS27512G
Shell size |
A Thread size, class 28 |
p +.017 -.016 hex |
8 |
.8750 - 20 UNEF |
1.062 |
10 |
1.0000- 20 UNEF |
1.188 |
12 |
1.1250- 18 UNEF |
1.312 |
14 |
1.2500- 18 UNEF |
1.438 |
16 |
1.3750- 18 UNEF |
1.562 |
18 |
1.5000- 18 UNEF |
1.688 |
20 |
1.6250- 18 UNEF |
1.812 |
22 |
1.7500- 18 UNS |
2.000 |
24 |
1.8750- 16 UN |
2.125 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Threads to be in accordance with MIL-S-7742.
4. Remove all burrs and sharp edges.
FIGURE 1. Nut, hexagon - Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1. Material: See table I.
Finish: See table I and MIL-DTL-38999. Applicable connectors: MIL-DTL-38999, series II. Safety wire hole pull out:
Safety wire holes shall not pull out when safety wire NI - CU alloy (MONEL)
(UNS NO4400) or NI - CR alloy (INCONEL) (UNS NO6600) .020 inch (0.51 mm) diameter in accordance with NASM20995 is threaded through a hole and a pull of 30 pounds (133.5 Newton) minimum is applied. Three pulls shall be made, one parallel with axis of nut in each direction and one perpendicular to axis of nut.
TA8LE I. Material and finish. 1/
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business