MS27515C
Inches .000 |
mm 28.55 |
.001 |
28.58 |
.002 |
29.64 |
.003 |
30.66 |
.004 |
30.73 |
.005 |
30.96 |
.006 |
31.65 |
.007 |
31.72 |
.010 |
32.82 |
.012 |
33.32 |
.015 |
33.45 |
.016 |
33.83 |
.020 |
34.90 |
.022 |
35.99 |
.036 |
36.53 |
.063 |
36.63 |
.078 |
37.01 |
.085 |
38.07 |
.100 |
39.67 |
.109 |
39.80 |
.115 |
40.18 |
.123 |
42.88 |
.125 |
42.98 |
.126 |
46.02 |
.128 |
|
NOTES: 1. Normal keyway position. |
For other keyway positions, see figure 4 of MIL-DTL-38999. |
2. Insert front surface shall be flat within .005 Total Indicator Reading (TIR).
3. Diameters A and D shall be concentric within .015 TIR.
4. Diameters D and I shall be concentric within .015 TIR at Maximum Material Condition (MMC).
5. Diameter A with respect to diameter B, and diameter D with respect to diameter N, shall be concentric at MMC.
6. Dimensions are in inches.
7. The point at which a gauge pin, having the same basic diameter as the mating contact and a square face, touches socket contact spring.
8. The gauge features for GG shall be .010 (0.25 mm) smaller than the MMC size at basic location.
9. Metric equivalents are given for general information only.
FIGURE 1. Receptacle, class E - Continued.
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MS27467, MS27653 and MS27661.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business