MS3180G
REQUIREMENTS:
Dimensions and configuration: See figure 1.
The chain or rope shall rotate freely on the fastener.
Qualification and requalification requirements shall be in accordance with MIL-DTL-26482, series 1 and
2 connectors.
Materials:
a. Cover - aluminum alloy.
b. Cover, bayonet pins - stainless steel, passivated.
c. |
Chain |
- stainless steel, passivated in accordance with RR-C-271, type II, |
class 3. |
||
d. |
Disk (gasket) |
- silicone elastomer. |
e. |
Fasteners |
- stainless steel, passivated. |
f. |
Rope |
- 7 strand stainless steel, passivated. |
Finish Designators (class E is superseded by class L):
A - series 2, hard anodic, non-conductive, black, non-reflective, in accordance with
MIL-A-8625, type III, .0008 inch (0.020 mm) minimum thickness.
L - series 2, electroless nickel, conductive, in accordance with MIL-DTL-26482.
D - series 1 and 2, pure electrodeposited aluminum, conductive, non-reflective, in accordance with MIL-DTL-26482.
T - series 1 and 2, nickel fluorocarbon polymer, conductive, non-reflective, in accordance with MIL-DTL-26482.
W - series 1 and 2, cadmium, conductive (500 hr dynamic salt spray in accordance with
MIL-DTL-26482; olive drab).
K - series 1 and 2, zinc-nickel, conductive, black, nonreflective, in accordance with
MIL-DTL-26482.
QUALIFICATION: Qualification and requalification requirements shall be in accordance with
MIL-DTL-26482, series 1 and 2 connectors.
Connector mating: This protective cover mates with all MIL-DTL-26482, series 1 and 2 connector plugs.
Intermateability dimensions shall be in accordance with MIL-DTL-26482.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business